2018 Kenworth Mechanics Truck, T270, 26k GVWR, IMT 10k Crane, Miller Trailblazer Welder, 198k Miles, 9500 Hours

About this truck

Thanks for taking the time to check out this 2018 Kenworth T270 mechanics truck, coming to us out of New Mexico. Rust free and turnkey ready to work, powered by a PX7 300hp Paccar engine mated to an Allison 2500RDS automatic transmission. Air ride rear, air brakes, 26,000 GVWR, showing 198,781 miles and 9,574 hours at the time of this writing.

Equipped with an 11′ IMT Dominator bed, multiple sets of drawers, a waste oil tank and transfer pump, a CAS45R rotary screw compressor, an IMT 10,000-25 series crane with wireless remote, and a Miller trailblazer 325 welder. Fully rigged out truck – all of the equipment works as it should.

This truck has just been serviced and is ready to go to work. Repairs just completed include:

Oil change and new fuel filters, new engine belt and tensioner, new rear brake shoes and drums, oil pan gasket replaced, new front spring bushings, new HVAC control panel, new tires (all six), rear track bar, and a front end alignment.

The entire exterior of the body has been sandblasted and repainted, and shows like new. New bedliner applied inside of the bed, and on the work bench bumper. All of the doors close, latch, lock, and seal as they should. This truck lived its life in the southwest and is free of any rust.

The D1 compartment has a set of eight IMT drawers, with one shelf over top. The D2 compartment has another set of eight drawers, with two shelves. One shelf over the driver wheel well compartment. Another set of eight drawers in the driver rear compartment, with two shelves over top.

Work bench rear bumper with pass through bin storage underneath, master slide locks for both bedsides, rear LED work lights, and a two hitch receiver. Inside of the bed is mounted the Miller Trailblazer welder, and one waste oil tank.

The crane compartment houses the diaphragm pump to fill and evacuate the waste tank, the body control panel to control bed lighting and outriggers, a Reelcraft air hose reel, air regulator and drier, and a factory wireless remote.

No shelves over the passenger wheel well compartment. The P2 compartment has a full set of bolt drawers. The P1 compartment has two small shelves, and storage for torch bottles with two bottle racks.

The crane is an IMT 10,000-25 series crane, with a 10,000# maximum lifting capacity and a two stage hydraulic extension out to 25′ of reach. Run off a factory wireless remote, the remote controls the compressor, and can turn the truck on and off. The crane meter shows 92 total hours.

The compressor runs as it should and builds air quickly, and shows 345 total hours.

If you have any questions, or if you need any additional photos, videos, or information – feel free to call or text anytime at 804-716-8487.

Offered for sale by Truck World RVA in Oilville VA. All trucks are offered on a first come, first serve basis. Please call ahead to confirm availability.