2015 Kenworth T370 Mechanics Truck, PX9 350HP, Air Ride, 14′ Summit Service Body, 10629 Crane, Trailblazer Welder

About this truck

Thanks for taking the time to check out this 2015 Kenworth T370, coming to us off a large fleet out of Colorado. Rust free, turnkey and ready to work, fully serviced, all of the equipment works as it should. Very well set up and fully rigged out – multiple sets of drawers, waste oil tank, 10k 29′ reach crane with wireless remote, hydraulic compressor and outriggers, and a Trailblazer welder. Needs nothing.

Powered by a Paccar PX9 rated at 350hp, and mated to an Allison 3000RDS. Air ride and locking rear, 4.78 rear end. Showing 288,362 miles and 12,278 hours at the time of this writing. Repairs just completed include:

Oil change and new fuel filters, front and rear brakes adjusted, new rear axle trac bar, front timing cover resealed (no oil leaks present) new steer axle bushings, and a front end alignment.

Overall this truck was well maintained before we took it in, and just needed some normal service work. Anything we find that needs attention, we address. We use all OEM parts, and I can provide receipts for all work just performed.

The bed is a 14′ Summit service body, rust free and in good shape overall. Some minor areas of damage/scratching, but all of the doors close, latch, and lock as they should.

The D1 compartment has one shelf. In the D2 compartment there is a full set of Granite drawers, seven total, and two shelves. In the D3 compartment is another set of seven Granite drawers, and two shelves. The driver wheel well compartment has a set of three Granite drawers, and two shelves. The driver rear compartment has another set of eight Granite drawers, and two shelves. TONS of drawers in this bed.

Work bench rear bumper with pass through bin storage underneath, a tow hitch receiver, and hydraulic outriggers. Inside of the bed is mounted a large waste oil tank, and a Miller Trailblazer welder.

The crane compartment houses the body control panel to control the outriggers and all of the bed lighting. A Hannay air hose reel with air regulator and drier, one shelf, and the factory wireless remote. One shelf over the passenger wheel well compartment. Three shelves in the P3 compartment. The P2 compartment houses your waste suction hose, and the diaphragm transfer pump, and has three shelves. The P1 compartment has a cut out where the welder face sits, and has torch bottle racks.

The crane is a Summit 10629, with a 10,000# maximum lifting capacity and a two stage extension out to 29′ of reach. The compressor is a Vanair RC40-L, builds air quickly and operates as it should.

If you have any questions or if you need any additional photos, videos, or information – call or text anytime at 804-716-8487.

Offered for sale by Truck World RVA in Oilville VA. All trucks are offered on a first come, first serve basis. Please call ahead to confirm availability.